The mop is an indispensable cleaning tool for the family. The floor facade of the house is almost entirely controlled by a mop. Every family cannot live without a mop. With the development of society and economy, there are more and more types of mops, and they are more and more convenient to use, especially rotating mops. Because it is fully functional and easy to use, it has occupied most of the mop market in recent years. Share. After rotating the mop, it is necessary to pay attention to cleaning and maintenance to maintain its service life, so how to maintain the service life of the rotating mop? Here is a brief introduction.
 
[Notes on the use of mop]
 
1. In order to extend the efficiency of the mop, it is best to wipe off the hair and dust before mopping the floor.
 
2. The drag direction of the mop is as far as possible along the line of the floor, and it is easy to remove dirt to achieve a cleaning effect.
 
3. It is best to rinse the cleaning mop with running water. If you have the habit of using floor cleaner, you can use a dirty mop to clean the dirt under the faucet, then put it in a bucket with detergent, and then wring it out.
 
4. Use a mop to wipe the wooden floor, try not to use a mop with high humidity to squeeze water. Due to the pores on the surface of the wooden floor, it is easy to absorb water, resulting in fragile deformation of the floor and shortening its service life.
 
[Maintenance of mop]
 
1. When used, the mop is most likely to contact the organic ingredients on the ground. These ingredients will be used by fungi and bacteria. Microorganisms and bacteria such as molds, fungi, candida and dust mites grow rapidly when exposed to moisture for long periods of time.. When used later, not only can not clean the ground, but it can also cause the spread of bacteria and cause diseases such as respiratory tract, intestinal tract and allergic dermatitis. Therefore, it is recommended that after each use of the mop, carefully rinse with water, wring out the mop, and then put the sun in the dryer. If there are conditions at home, it is best to place it in a well-ventilated place and make full use of solar ultraviolet rays for physical sterilization. If there is no balcony or it is inconvenient to dry, it is best to move and dry when drying. The ventilated room was left to dry before returning to the bathroom.
 
2. When the mop has peculiar smell, the mop can be cleaned with diluted bleach.
 
3. When the hair sticks to the mop, you can clean it with a brush, or remove it with tape when it is dry.
 
4. The mop material is more delicate, not suitable for heavy oil stains, uneconomical, and the mop is easy to wear during use.
 
5. In order to keep the home clean, it is recommended to replace the mop head every two to three months.

Some customers always complain that they can't pull their hair apart with a mop, but as long as you use the right method, you can pull your hair apart.
 
The principle of electrostatic adsorption is the principle of electrostatic adsorption of microfiber mop head. The mop head is the best option for absorbing hair in dry conditions, so you have to drag the hair to the ground or floor to dry, it is better to rotate it. Drag so you can absorb the hair. If the ground is wet and covered by hair and then dragged with a mop head, the effect will be worse, so it is recommended that you can buy more than a few mop heads or poles, and it is more convenient to use wet and dry respectively.

The head of the mop is made of microfiber material, the fineness of which is only 1/20 the size of the hair. This material has a special capillary phenomenon and can absorb more than 7 times its own weight per unit weight. Its water absorption speed is more than twice that of cotton, and it can completely absorb water.
 
It can not only easily and thoroughly clean floors of various materials, such as marble floors, tile floors, wooden floors and even glass panels. It can also be used to clean furniture, corners, ceilings, doors and windows, as well as all kinds of common household stains, such as kitchen oil stains, footprints left in the living room, milk juice accidentally knocked down by children, etc., you can also wipe the body and so on.
 
Accor brand mop head is made of wear-resistant microfiber material, super absorbent, super purified, and will not scratch various floors. Accor mop head adopts a new cross-stitch process, and the mop head is knotted like a rake. In other words, it is not only more absorbent, but also durable and will not disperse.

Some customers complain that the mop head is dehydrated and dry. When it is dehydrated, skills are always required. After mastering the skill, the mop head can be dried.

First open the pole, adjust the pole to the open state, then step on the pedal, or press the pole and dry it several times.

Tip: When your feet are dehydrated, don't use brute force the first time. The principle of dehydration is that the faster the rotation speed, the better the rotary drying effect. The hand lever needs to be forced down, preferably continuous underground pressure, can not stop it.